Tri-BNC SubModule
TBNC10
The TBNC10 is used to connect to the ICS42 Module. It splits signals from a 9-way LEMO® connector on the Module’s front panel to a single triangular prism with 3 BNC connectors to easily connect sensors.
Three BNC connectors are provided on the SubModule to interface to the appropriate triaxial or single-axis accelerometer. The SubModule connects to the ICS42 Module through a 300 mm, 500 mm, or 1200 mm fly-lead.
Three BNC connectors are provided on the SubModule to interface to the appropriate triaxial or single-axis accelerometer. The SubModule connects to the ICS42 Module through a 300 mm, 500 mm, or 1200 mm fly-lead.
Product Full Description
The TBNC10 is used to connect to the ICS42 Module. It splits signals from a 9-way LEMO® connector on the Module’s front panel to a single triangular prism with 3 BNC connectors to easily connect sensors.
Three BNC connectors are provided on the SubModule to interface to the appropriate triaxial or single-axis accelerometer. The SubModule connects to the ICS42 Module through a 300 mm, 500 mm, or 1200 mm fly-lead.
Specifications
Where used:
With any ICP® based sensor commonly used to measure vibration, acceleration, force or pressure.
With any voltage source up to ±10 V in voltage input mode
TBNC10 options:
TBNC10 300
The BNC Jack connectors connect to the ICS42 Module with a total cable length of 300 mm.
TBNC10 500
The BNC Jack connectors connect to the ICS42 Module with a total cable length of 500 mm.
TBNC10 1200
The BNC Jack connectors connect to the ICS42 Module with a total cable length of 1200 mm.
Information on technical characteristics is based on the latest information available at the time of publication.